A resin-bound stone pool deck is one seamless surface of natural stone that splash and rain soak through instead of pooling. We install them for homeowners and custom pool builders in Liberty Hill, Leander, Georgetown and Cedar Park.

The gaps between the stones let water through, so the deck is designed to drain instead of puddling at the coping or running toward the house.
No pavers to settle, no grout to crack out, no weeds in the seams. One continuous surface edge to edge.
Pick from 140+ stone blends. Frame the pool in a contrast border, curve the edges, or set a monogram into the deck.
We schedule around your builder, keep everyone updated every week, and walk the finished deck with you before we call it done.
We install the deck as part of the build, at the depth and base your builder plans for. If your builder is already working with us, they handle it on their bid.
It can often go over the deck you already have if the base is sound. We check that at the site visit and tell you straight if it isn't.
A second blend around the pool edge or the deck border is one of the most popular choices. It is laid in the same install.
Foot traffic after 24 to 48 hours, depending on the temperature. Until then, keep wet feet, drips and footprints off it; anything that marks it while it cures stays.
Typically 12 to 15 mm for foot traffic, per the manufacturer's data sheet. Your quote lists the depth for each area.
Rinse it and sweep it. Use a pH-neutral cleaner when it needs more, and rinse off chemical spills, since some chemicals can break down the resin. Full steps are on our care page.
It's designed to drain, but each city decides how it counts. We confirm with your city before you count on it.
Published installed ranges for resin-bound stone run about $11 to $17 per square foot nationally (HomeGuide). Your price depends on square footage, base prep and blend, and it's written area by area on your quote.
We bring a sample and a bucket of water, measure the deck, and send your quote within 48 hours.